Send Page  |   Print Page  |   Please choose your language  |   Newsletter Registration  |  
 Search

Please choose your language

English German French Italian Russian Chinese Japanese Korean

Sensors

TLE492xC and TLE4957xC - Speed Measurement in Industrial Applications

Image

Block diagram

Image

Sensors in the TLE492xC and TLE4957x families detect the motion and position of ferromagnetic and permanent magnet structures by measuring the differential flux density of a magnetic field. All sensors feature a self-calibration mode for optimum accuracy. After start-up, only a few transitions are required before self-calibration has been completed and a high degree of operational accuracy has been achieved. These sensors thus combine fast power-up with high accuracy and sensitivity.

TLE492xC and TLE4957xC sensors switch at either zero magnetic field crossing or at a viable hysteresis (adaptive or non-adaptive). Customers can also choose different watchdog settings. A broad temperature range, high ESD robustness and large EMC resistance make TLE492xC and TLE4957xC products the perfect fit for harsh automotive environments. A wide range of features and varying hysteresis concepts mean they are also ideal for Hall-based speed sensing in a wide variety of industrial applications. The sensors come in the proven PG-SSO package with three leads and two integrated capacitors.

The TLE4957xC family is derived from the TLE492x family and offers extra immunity against magnetic noise from mechanical vibrations and external magnetic sources.
For further information, visit: www.infineon.com/magnetic-sensors

Features Applications
  • High sensitivity 
  • Single-chip solution
  • Symmetrical thresholds
  • High resistance to Piezo effects
  • Advanced performance thanks to dynamic self-calibrating principle
  • 1Hz low cut-off frequency
  • Digital output signal
  • Two-wire and three-wire configuration possible
  • Wide operating temperature range
  • Fast start-up times
  • Large operating air gaps
  • Reverse voltage protection at Vs-PIN
  • Short-circuit and overtemperature protection of output
  • No external filter capacitor required
  • Module style package with two integrated capacitors:
    • -4.7nF between Q and GND
    • -47nF between Vs and GND: required for micro-cuts in power supply
  • Speed sensing (crankshafts for example)
  • Transmission speed
  • Speedometer
Image

More Information

Product Details

Downloads

Ordering Numbers

  • SP000718170: TLE4924C-1 E6547
  • SP000718250:TLE4924C-2 E6547
  • SP000718258:TLE4926C-HT E6547
  • SP000718266:TLE4927C E6547
  • SP000700818:TLE4928
  • SP000718274:TLE4928C E6547
  • SP000649296:TLE4957C E6747
  • SP000649306:TLE4957C E6847
  • SP000745374:TLE4957C-2 E6747
  • TLE4957C-2 E6747:TLE4957C-2 E6847

Share |

Automotive Power

TLE 4678 - Enhanced Version of TLE 4278 Now Available

To satisfy rising market requirements, Infineon has introduced a new linear voltage regulator, the TLE 4678. This new product is an enha ...

Sensors

TLE 4941plusC - Next-Generation Wheel Speed Sensor Now Available

TLE 4941plusC is the latest offspring of the extremely successful TLE 4941 family, based on new 0.35µm technology B7CA, which is manufa ...

 

TLE 4966-2K/-3K - New Dual ...

The TLE 4966-2K/ ...